跳到主要內容區
  1. 首頁
  2. 系所成員
  3. 師資陣容
  4. 專任師資
  5. 黃國銘

黃國銘

黃國銘 Kuo-Ming Huang

黃國銘

副教授

分機：7102

E-mail：kmhuang@mail.ntou.edu.tw

 

學歷

國立臺灣海洋大學 輪機工程學系 博士
國立臺灣海洋大學 輪機工程學系 碩士
國立虎尾科技大學 機械製造工程系 學士

經歷

國立臺灣海洋大學 輪機工程學系 專案教師
國立臺灣海洋大學 海洋中心 博士後研究員
中華民國陸軍 機械化步兵第二三四旅 作戰官
崇傑股份有限公司 機械設計/繪圖 繪圖員

專長

金屬成形數值分析、史特靈引擎機構設計與製造、船用引擎熱電發電機系統

學術服務與榮譽

 

授課科目

機構學、應用力學實驗、工廠實習、機械製造、塑性加工學、 計算力學導論、實驗設計與品質工程

著作目錄

JOURNAL PAPERS CONFERENCE PAPERS 研究計畫 專利 專書

JOURNAL PAPERS

  1. Guo-Ming Huang, Jang-Ping Wang, Ming-Huang Hsu, Kuo-Chen Huang, Te-Tsun Chen, Tai-Cheng Chen, Application of Mold Trough Design to Blanking Technology, The International Journal of Advanced Manufacturing Technology, Accepted,(2016).(SCI) DOI：10.1007/s00170-016-8799-6
  2. Jang-Ping Wang, Guo-Ming Huang, Fine Extrusion Device Approach, The International Journal of Advanced Manufacturing Technology, Accepted,(2016). (SCI) DOI：10.1007/s00170-015-8277-6
  3. Guo-Ming Huang, Jang-Ping Wang, Te-Tsun Chen, Chia-Ling Chen, Ming-Hong Xu, Optimal Design for the Fluid Cavity Shape in Hydromechanical Fine Blanking, The International Journal of Advanced Manufacturing Technology, Vol. 78, pp. 153-160, 2015.(SCI)(IF：1.779)
  4. Jang-Ping Wang, Guo-Ming Huang, Chin-Chun Chen, Yi-Ching Ye, Te-Tsun Chen, Investigation of the Shear-zone Length in Fine Hydromechanical Blanking, The International Journal of Advanced Manufacturing Technology, Vol. 68, pp. 2761-2769, 2013.(SCI)(IF：1.779)
  5. Jang-Ping Wang, Guo-Ming Huang, Hsien-Der Lee, Chin-Chun Chen, Te-Tsun Chen, Chia-Ling Chen, Optimization of Fine Hydro-blanking, Steel Research International, Vol. 84, pp. 777-783, 2013.(SCI)(IF：1.027)
  6. Jang-Ping Wang, Yi-Cih Jheng , Guo-Ming Huang, Jen-Hsien Chien, Artificial Neural Network Approach to Authentication of Coins by Vision-based Minimization, Machine Vision and Applications , Vol. 22, No. 1, pp. 87-98, 2011. (SCI)(IF：1.549)
  7. Jang-Ping Wang, Guo-Ming Huang, Hsien-Der Lee, Tsung-Han Wu, Integrated Optimal Design for Drawing Limit of Stainless Steel in Hydro-mechanical Deep Drawing, Steel Research International, Vol. 81, No. 9, pp. 636-639, 2010. (SCI)(IF：0.733)
  8. Guo-Ming Huang, Jang-Ping Wang, Hsien-Der Lee, Cheng-Sung Chang, Rigid-plastic Boundaries Approach to the Analysis of Arbitrary Profile Dies in Axisymmetric Extrusion, Journal of Materials Processing Technology, Vol. 209, pp. 4351-4359, 2009. (SCI)(IF：1.783)
  9. Jang-Ping Wang, Guo-Ming Huang, Sheng-Hua Yurs, Profiles Detection in Ring Convex Forming by ACLN with Sub-Pixel Accuracy, Key Engineering Materials, Vols. 364-366, pp. 199-204, 2008. (SCI)(IF：0.224)

CONFERENCE PAPERS

  1. Jang-Ping Wang, Guo-Ming Huang, Ming-Huang Hsu, Kuo-Chen Huang, Forming the Workpiece Geometry Analysis for Bevel Gear, The Chinese Society of Mechanical Engineers, December 11-12, Kaohsiung, Taiwan, 2015.
  2. Jang-Ping Wang, Guo-Ming Huang, Ming-Huang Hsu, Jeng-shiun Liou, You-Chi Gau, Chih-Yung Su, Tai-Cheng Chen, The Optimal Design on the Process For Spur Gear Using the Through Type in Hydro-mechanical Fine Blanking, The Chinese Society of Mechanical Engineers, December 11-12, Kaohsiung, Taiwan, 2015.
  3. Jang-Ping Wang, Chia-Ling Chen,Guo-Ming Huang, Bo-Yu Chu, Ming-Houng Xu, I-Fu Lai, The research for the management of the ballast water－Silver ion Sterilizer, The 5th Cross-Strait Conference on Ocean Engineering and Maritime Technology, November 12-16, Keelung, Taiwan, 2015.
  4. Jang-Ping Wang, Guo-Ming Huang, Bo-Yu Chu, Ming-Houng Xu, Fin Design and Testing of Saving Material Used to Clamp Thermoelectric Chip, The Chinese Society of Mechanical Engineers, December 7-8, Kaohsiung, Taiwan, 2012.
  5. Jang-Ping Wang, Guo-Ming Huang, Shr-Jie Tzeng, Chi-You Chen, Setup of Measurements for the Experimental Test to the Thermoelectric Generator (TEG), The National Conference on Theoretical and Applied Mechanics, November 19-20, Yunlin, Taiwan, 2010.
  6. Jang-Ping Wang, Chih-Chun Chen, Guo-Ming Huang, Yi-Ching Ye, Taguchi Method and Finite Element Analysis Applied to Fine Hydro-Blanking, The 34th National Conference on Theoretical and Applied Mechanics, November 19-20, Yunlin, Taiwan, 2010.
  7. Jang-Ping Wang, Guo-Ming Huang, Tsung-Han Wu, The Study of Hydro-blanking by Taguchi Method, The Chinese Society of Mechanical Engineers, November 21-22, Changhua, Taiwan,2008.
  8. Yuan-Chuan Hsu, Yi-Hog Lin, Guo-Ming Huang, An Influence Analysis of Billet Forms on the Compression Stability for High-Aspect-Ratio Billets in Upsetting, Mold & Molding Technology, July, Taipei,Taiwan,2005.

研究計畫

  1. 一種新型剪鍛技術用於傘齒輪快速成形研究，科技部，MOST 105-2221-E-019-024-。(協同研究人員)
  2. 金屬材料厚薄深引伸成形，科技部，MOST 104-2221-E-019-023-。(博士後研究)
  3. 銅銀離子消除海生物及細菌之運用於船用壓艙水處理研究，科技部，MOST 104-2622-E-019-005-CC3。 (博士後研究)
  4. 厚材成品精密液壓下料之研究，國科會計畫報告，MOST 103-2221-E-019-004-。(博士後研究)
  5. 利用液壓法進行擺線形齒輪精密下料之最佳製程設計研究，國科會計畫報告，NSC 101-2221-E-019-023-。(協同研究人員)
  6. 船舶壓艙水檢驗之建置，國科會計畫報告，NSC 101-2622-E-019-002-CC3。(研究助理)
  7. 真空式多樣化熱電致冷單晶片檢測平台之建置，國科會計畫報告，NSC 100-2622-E-019-005-CC3。(研究助理)
  8. 熱電致冷晶片模組檢測平台之建置，國科會計畫報告，NSC 99-2622-E-019-005-CC3。(研究助理)
  9. 晶片型熱電發電機系統檢測平台之建置，國科會計畫報告，NSC 98-2622-E-019-001-CC3。(研究助理)
  10. 利用漁船廢氣開發熱電發電機系統之研究，漁業署計畫報告，99農科-10.2.2-漁-F1(3)。(研究助理)
  11. 漁船廢氣應用在漁船電力系統技術研究，漁業署計畫報告，98農科-10.2.2-漁-F1(4)。(研究助理)
  12. 金飾品黃金成色檢測之研究-利用類神經網路進行K金成色檢測(3)，國科會計畫報告，NSC 95-2622-E-019-006-CC3。(研究助理)

專利

專書

登入成功